tschwery/reprapfirmware-dc42
Archived
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
206 commits 3 branches 0 tags 52 MiB
Commit graph

206 commits

This branch
This branch
All branches
Author SHA1 Message Date
Adrian Bowyer
cfdb9dcd89 Dud temperature count now has to reach 6 (about a second) before a heater trips out (Ian's request). Also heater reset M code (M562) added. Use that with great caution. 2013-12-11 14:11:51 +00:00
Adrian Bowyer
7215696e8b Function added to set hypotenuse lengths for multi-axis steps. These were previously computed on initialisation, but are now re-done after every M92. 2013-12-07 18:56:56 +00:00
Adrian Bowyer
a8437409f2 This time with correct version number and date... 2013-12-06 20:59:58 +00:00
Adrian Bowyer
91efcc4e48 M82 changed so that it reports steps/mm when given no arguments. 2013-12-06 20:56:08 +00:00
Adrian Bowyer
c6021aba5f Snowman tested... 2013-12-05 21:33:02 +00:00
Adrian Bowyer
92a48d2ec3 Snowman added to G Codes... 2013-12-05 21:32:08 +00:00
Adrian Bowyer
869373a546 Corrected heater flag in Platform.h for Duet v0.6 (wrong in previous commit...) 2013-12-05 17:34:42 +00:00
Adrian Bowyer
2022e8ab28 Various bits of file tidying... 2013-12-05 17:24:53 +00:00
Adrian Bowyer
d29058cf9d Bug in Z probing (the Move class had no function to return the number of probe points) fixed. 2013-12-05 13:22:01 +00:00
Adrian Bowyer
fd2cee2076 This time with th heater set correctly... 2013-12-04 15:38:05 +00:00
Adrian Bowyer
dd978290b5 Emergency stop added to the web interface (and Home All taken away, as you almost never want to home Z with the other two.) SD files tidied. 2013-12-04 15:36:26 +00:00
Adrian Bowyer
ad4246e6af Better version of the ORMAXIS.G file. 2013-12-04 11:53:50 +00:00
Adrian Bowyer
1a8ffb2d00 Second degree (ruled quadratic surface) bed plane compensation added. Probe three points to get plane compensation. Probe 4 [0 = min, 1 = max: (x0, y0), (x0, y1), (x1, y1), (x1, y0) in that order] to get second degree compensation. Also M115 print version added. 2013-12-03 14:46:28 +00:00
Adrian Bowyer
820b17857a This time with correct heater settings... 2013-12-03 09:56:27 +00:00
Adrian Bowyer
bfb02c8fb5 README updated to include library details and links to documentation. 2013-12-03 09:55:00 +00:00
Adrian Bowyer
f0d55e0c8f README updated. 2013-12-01 21:19:47 +00:00
Adrian Bowyer
27ae5f8730 Fixed (I hope) G92 bug found by Tony. 2013-11-30 17:22:16 +00:00
Adrian Bowyer
8b76430a9b RRP logo updated. 2013-11-30 15:48:03 +00:00
Adrian Bowyer
dfbc35d369 Bug found by Tony in the offsetting code fixed (I hope). 2013-11-29 23:50:59 +00:00
Adrian Bowyer
f0b7da252b M561 reset bed transform to identity added. 2013-11-29 10:55:43 +00:00
Adrian Bowyer
f9fe813610 Improved functionality for G30; can now be set from pre-recorded 
measurements as well as doing live probing (automatic or manual).
 2013-11-28 12:54:00 +00:00
Adrian Bowyer
409af6bb11 Manual Z probing added to G30 (see http://reprap.org/wiki/G-code). 2013-11-28 11:57:38 +00:00
Adrian Bowyer
a4d8f41271 G31 now waits for moves to end before measuring/reporting. G30 implemented. Has argument Pn n = 0,1,2 - takes probe reading at current XY and calls them point n for the purpose of bed plane calculation. Add an S field on the last probe (i.e. when n=2 usually, though you can do them in any order) to get it to fit the bed plane. 2013-11-27 22:59:37 +00:00
Adrian Bowyer
cccb14ede0 ...Now with correct version number. 2013-11-26 21:07:50 +00:00
Adrian Bowyer
88a929eef4 One ether bug (starting the ether after reading config.g) fixed owing to Tony's brilliant debugging persistence. It still hangs if the ether is unplugged, so that's next on the list. 2013-11-26 21:04:25 +00:00
Adrian Bowyer
a26a9f705a This time with the right date a version number... 2013-11-26 15:22:16 +00:00
Adrian Bowyer
7b9894e543 M206 implemented. This commit has the ethernet enabled and heaters set on by 1 (i.e. Duet v0.5 or below). 2013-11-26 15:12:24 +00:00
Adrian Bowyer
c0b7b4bace Working on the ether/USB problem. The network can now be disabled (#define NETWORK in Configuration.h). With it disabled the USB works with or without a network cable plugged in. With it enabled the USB only works with a network cable plugged in too. You have to wait for the ether to reinitialise (ether socket lights go out for a couple of secs, then come on, then the green one starts flashing) before trying to talk via the USB. The ether is initialised before config.g is run, so the IP is the one defined in platform.h. The network is disabled in this commit. The heaters are set on by 0, not 1 (i.e. Duet board v0.6 or later). To change this see #define HEAT_ON in platform.h 2013-11-26 13:38:23 +00:00
Adrian Bowyer
1792c68b49 Heater logic inverted for Duet v0.6. Remember to set HEAT_ON to 1 in platform.h for earlier versions, and to set it back _and_recompile_ before doing a commit for Duet v0.6 of higher 2013-11-25 16:39:46 +00:00
Adrian Bowyer
00a0ffd9b4 Homing against max endstop for Y (and X) implemented when there is a top 
endstop but not a bottom one.
 2013-11-25 11:03:36 +00:00
Adrian Bowyer
0670357001 Merge branch 'duet' of https://github.com/reprappro/RepRapFirmware into duet 2013-11-25 09:33:08 +00:00
Adrian Bowyer
d89b8bace0 X axis endstop now done with Z Probe (if it's activated). 2013-11-25 09:32:13 +00:00
Adrian Bowyer
d4dc6f2cfe M84 added for Pronterface compatibility. 2013-11-23 17:17:59 +00:00
Adrian Bowyer
4c74c4eb30 Upload of reprap.htm implemented (M560). The file must end "<!-- **EoF** -->" without the quotes. 2013-11-20 22:13:23 +00:00
Adrian Bowyer
cad6c8d74e Should now commit the RepRapFirmware.bin file 2013-11-20 18:52:26 +00:00
Adrian Bowyer
73a903e656 Fixed (I think) the M83 bug. 2013-11-20 18:47:53 +00:00
Jean-Marc Giacalone
b53832f4ce M92 bug fixed. 2013-11-20 10:41:00 +00:00
Jean-Marc Giacalone
3b0dd0ec58 Upload of configuration file config.g implemented with M559. 2013-11-20 10:25:44 +00:00
Adrian Bowyer
c9f2cb2b0b Removed tiny buggette in the heat timing code. 2013-11-19 21:57:59 +00:00
Adrian Bowyer
c33d1ac723 M503 implemented (tis time with added bug-free-ness...) 2013-11-19 18:34:48 +00:00
Adrian Bowyer
ec5f5fe536 M503 implemented. Prints the config file to USB. 2013-11-19 16:10:53 +00:00
Adrian Bowyer
926aabe078 Added z-probe type selection. See M558. 2013-11-19 15:00:23 +00:00
Adrian Bowyer
713a9fb6b1 Line-by-line web file upload added, but causes troub by blitzing http requests; so commented out. Unused pages for first release removed. 2013-11-19 12:14:12 +00:00
Adrian Bowyer
21424714f7 File upload mechanism also now works with the web code. If we can open a user's GCode file in the Javascript this will allow web uploads. Horay! See: http://www.html5rocks.com/en/tutorials/file/dndfiles/ 2013-11-18 17:40:14 +00:00
Adrian Bowyer
3dc0c7a27e GCode file upload via USB working. 2013-11-18 15:04:32 +00:00
Adrian Bowyer
965f41e953 Shifted new M codes to start at M550. Added setting of Netmask and gateway. 2013-11-17 22:10:14 +00:00
Adrian Bowyer
104528ab66 Added user-selection of IP address via M502. 2013-11-17 17:58:30 +00:00
Adrian Bowyer
c7286905b2 Ability to specify bed Z probe points added. See M505. 2013-11-15 22:04:52 +00:00
Adrian Bowyer
4c293f767f File printing in Marlin emulation w. Pronterface fixed. 2013-11-15 17:21:14 +00:00
Adrian Bowyer
68e0f833df Marlin emulation implemented. Pretty much working, but not extensively tested. 2013-11-14 23:32:50 +00:00