David Crocker
c71ecf1b8a
Version 0.78u
...
M0 no longer turns motors off
Updated M18 and M84 as per zpl fork
Don't insist that user provides values for all 5 possible extruders in
M906 command
Added Ormerod 2 sys files
Updated web interface files
2014-11-01 13:59:51 +00:00
David Crocker
c56fc2aeb0
Version 0.78t
...
Bug fix: M92 command would only set extruder steps/mm if either 1 or 5
extruder steps/mm was provided
Bug fix: Z-homing or bed probing when axis compensation was enabled
caused the X and Y origins to shift
We now mark drives as not homed when we disable them
File info code now supports gcode files generated by Simplify3D
Updated SD card files to latest web interface
Added more comments to config.g
Head movement commands that were in the tfree files have been moved to
the tpre files, to work better when G10 nozzle offsets are used
2014-09-26 19:13:51 +01:00
vincentfretin
a03c133bce
Fix wrong 5th point
...
Fifth point is P4
2014-08-16 14:37:11 +02:00
David Crocker
653ba3b344
Set H and L parameters to zero in the M305 commands
2014-07-28 19:52:41 +01:00
David Crocker
57704f033b
Merge RRP's 0.78 version and my 0.65k version
2014-07-06 19:57:21 +01:00
Adrian Bowyer
2b96c2b6f6
Version 0.78
...
Release.
2014-07-03 13:10:36 +01:00
David Crocker
9e1ad597a4
Merge branch 'duet'
...
Conflicts:
.gitignore
Configuration.h
GCodes.cpp
GCodes.h
Heat.cpp
Heat.h
Move.cpp
Move.h
Platform.cpp
Platform.h
RepRapFirmware.cpp
RepRapFirmware.h
Reprap.h
SD-image/sys/config.g
Webserver.cpp
Webserver.h
network/ethernet_sam.c
network/ethernet_sam.h
network/httpd.c
2014-06-28 17:58:03 +01:00
Jean-Marc Giacalone
23c5f47204
Move tool call in config.g to before M92 command.
2014-05-08 15:47:24 +01:00
Jean-Marc Giacalone
5204dfa834
config.g now selects tool head 1 and sets speeds and accelerations.
2014-05-08 11:19:39 +01:00
Adrian Bowyer
4104ff461b
Version 0.65a. This allows the MAC address for the Duet to be set in config.g (q.v.),
...
which allows multiple Duets to be on the same network.
2014-05-07 18:17:44 +01:00
David Crocker
9edaed4ac1
Further improvements to web upload and tidy-up
...
Further improved web file upload speed
Dealt with Eclipse code analysis warnings
Made some more functions and parameters const-correct
2014-01-30 14:26:45 +00:00
Adrian Bowyer
96818433c6
Making master branch the same as the duet branch.
2013-12-14 12:03:25 +00:00
Adrian Bowyer
d29058cf9d
Bug in Z probing (the Move class had no function to return the number of probe points) fixed.
2013-12-05 13:22:01 +00:00
Adrian Bowyer
8b76430a9b
RRP logo updated.
2013-11-30 15:48:03 +00:00
Adrian Bowyer
f0b7da252b
M561 reset bed transform to identity added.
2013-11-29 10:55:43 +00:00
Jean-Marc Giacalone
b53832f4ce
M92 bug fixed.
2013-11-20 10:41:00 +00:00
Jean-Marc Giacalone
3b0dd0ec58
Upload of configuration file config.g implemented with M559.
2013-11-20 10:25:44 +00:00
Adrian Bowyer
965f41e953
Shifted new M codes to start at M550. Added setting of Netmask and gateway.
2013-11-17 22:10:14 +00:00
Adrian Bowyer
104528ab66
Added user-selection of IP address via M502.
2013-11-17 17:58:30 +00:00
Adrian Bowyer
c7286905b2
Ability to specify bed Z probe points added. See M505.
2013-11-15 22:04:52 +00:00
Adrian Bowyer
8b3931c8cf
Memory diagnostics added. Mem usage is printed whenever you turn debugging on (even if it is already on).
2013-11-13 18:16:43 +00:00
Adrian Bowyer
4f703d86ec
Various minor G/M codes implemented like M0. Z start speed and acceleration reduced; they were a bit fierce before.
2013-10-29 22:27:49 +00:00
Adrian Bowyer
676bbab6a1
Fixed a bug whereby long extrudes simultaneous with short XY moves were constrained by the XY upper velocity and acceleration limits, rather than those for extrusion. Normally you want extrusion to be subservient to XY. But (typically when a retraction is being recovered during an XY move) the extrusion limits should constrain the XY move, not the other way round.
2013-10-27 16:21:21 +00:00
Adrian Bowyer
e1601d7b3f
Various bits of code tidying. Lookahead fixed to take account of bed transform (we can no longer assume that Z moves are strictly orthogonal to XY moves, and so their scalar product may be non-zero). All velocities are now in mm/s internally. The GCodes class is responsible for multiplying mm/min by 0.0166667.
2013-10-24 16:53:25 +01:00
Adrian Bowyer
708822a54e
A couple of tidyings and additions:
...
1. Z home now moves home, rather than just setting the coordinate.
2. Wait for temps implemented.
Also the JSON requests for the g code filelist has been temporarily commented
out in reprap.htm. It was causing the firmware to hang sometimes. To be investigated.
Machine now prints nicely...
2013-10-22 18:27:12 +01:00
Adrian Bowyer
3c901fb194
Further work on Z probing. One problem was working with a white-painted bed. Replacing that with ordinary Kapton-covered glass seems to work better. And that has allowed the debugging of the code. But the probe still does not always see the bed.
2013-10-21 23:09:21 +01:00
Adrian Bowyer
79c008d469
G31 modified to allow reporting of probe values, and setting of a Z value and threshold. (See http://reprap.org/wiki/G-code#G29-G32:_Bed_probing )
2013-10-20 22:48:26 +01:00
Jean-Marc Giacalone
8d92b70d0f
File list implemented. Also M201 to set axis accelerations via USB.
2013-10-08 16:33:10 +01:00
Adrian Bowyer
027ddf3b8e
Code added to add a bed plane z = aX.x + aY.y + aC to all movements.
...
Note that this means that X/Y minimum speeds and accelerations now take
precedence over Z, unless there is only Z movement.
2013-09-13 13:05:25 +01:00
Adrian Bowyer
e3fd24ca95
Configuration file (in sys/config.g) implemented.
2013-09-05 16:10:44 +01:00
