reprapfirmware-dc42/SD-image/sys/config.g at 676bbab6a1e2c985cdbdfa735ef3f346129f1d65 - tschwery/reprapfirmware-dc42 - INF3

tschwery/reprapfirmware-dc42

Archived

This repository has been archived on 2025-02-01. You can view files and clone it, but cannot push or open issues or pull requests.

Adrian Bowyer 676bbab6a1 Fixed a bug whereby long extrudes simultaneous with short XY moves were constrained by the XY upper velocity and acceleration limits, rather than those for extrusion. Normally you want extrusion to be subservient to XY. But (typically when a retraction is being recovered during an XY move) the extrusion limits should constrain the XY move, not the other way round.

2013-10-27 16:21:21 +00:00

13 lines

308 B

Text

Raw Blame History

 ; RepRapPro Ormerod
 ; Standard configuration G Codes
 M111 S1; Debug on
 G21 ; mm
 G90 ; Absolute positioning
 M83 ; Extrusion relative
 M107; Fan off
 G31 Z0.7 P400 ; Set Z probe height and threshold
 M906 X400 Y400 Z400 E800 ; Motor currents (mA)
 ;M201 X4000 Y4000 E4000 ; Accelerations (mms-2)
 T0 ; Extruder 0