Homing speed:
- The speed factor (M220 command, or speed control in DWC and PanelDue)
no longer affects the speed of homing moves or other special moves (i.e.
G1 commands with S1 or S2 parameter)
Bug fixes:
- Fixed the M120 (Push)
command
- Setting relative extruder movement (M83) or a feed rate (G1
Fxxx) in config.g now works again
- The F (feed rate) parameter is now
processed correctly on a G1 command with the R parameter
- If you used
M106 to change a fan PWM frequency, the change did not take place until
you next changed the speed
- On boards with SAM3X processors, due to a
chip bug the fan speed was sometimes incorrect if you changed the PWM
frequency
- If an http client requested a non-existent file that was not
an HTML file, the server incorrectly returned a 404 HTML page
Restructured the header file inclusion so that the .cpp files are
dependent on fewer header files, resulting in less recompilation when
most header files are changed
Bed compensation taper is now applied to 3/4/5-point compensation
methods too
Recognise generated-with comment in new Cura gcode files
Recognise filament-used info min new kisslicer files
When uploading files, create the full path if necessary
Duet 0.8.5 webserver looks for gzipped files first
A second controlled fan on the Duet 0.6 is no longer inverted
Renamed function Network::IPAddress to GetIPAddress to avoid clash with
IPAddress class used in DuetEthernet build
Duet 0.8.5 web server now looks for a gzipped version of the file is a
web file was not found
Duet 0.8.5 web server only returns a 404 page of the file that was not
found was a .html or .htm file
- Added support for M374 (save height map) and M375 (load height map)
- Added M376 (set bed compensation taper height)
- Added T parameter to G31 command
- M500, M501 and M502 now use config_override.g instead of flash memory.
The parameters saved and restored are:
-- M307 auto tune results
-- PID parameters, if you used M301 to override the auto tune PID
settings
-- Delta printer M665 and M666 settings
-- G31 trigger height, trigger value and X and Y offsets
- The M501 auto save option has been removed
- Removed S and T parameters from M301 command. Use M307 command
instead.
- M301 with negative P parameter no longer sets bang-bang mode. Use M307
instead.
- Added P parameter to the G31 command to specify Z probe type. This
allows you to view the parameters for the Z probe(s) and to set
parameters for a particular Z probe type without selecting that type.
G31 P or G31 P0 prints the parameters of the currently-selected Z probe.
- Z probe offsets are now applied during G30 probing with specified XY
coordinates, including during delta auto calibration
- Z probe recovery time is now applied from the end of the travel move
just before probing
- Fixed bad dive height when using G29 with a large trigger height
- Fixed bad JSON message during printing when there were no active
extruders
- Added exception handlers and store a software reset code when an
exception occurs
- Fixed reset reason text because on the Duet WiFi a watchdog reset can
look like an external reset
- G30 S-1 how printes the stopped height
- Implemented M401 and M402
Fixed bugs related to grid bed compensation and M571 in 1.17dev7 version
Software reset code storage/retrieval now works on Duet WiFi
Removed max average printing acceleration parameter
M571 now accepts F parameter to set the PWM frequency
M106 now shows if fan is disabled
Implemented loading height map from file (G29 S1)
Implemented move segmentation when grid levelling is used
M571 now accepts a P parameter to define the output pin
M558 R parameter is now Z probe recovery time
Keep track of time locally instead of using the inaccurate RTC
M109 and M104 default to first tool if no tool selected or specified
M109 activates the tool if no tool or a different tool was activated
Default max temperature excursion increased to 15C
Removed PROTO1 confivguration, added RADDS configuration
Fixed deadlock in some earlier 1.17dev builds when a macro that does
movement is run during a print
Grid compensation now working except for G28 S2 and lack of segmentation
for long moves
Fixed pause command that was broken in previous 1.17 dev release
Support mixing extruders using absolute extruder coordinates, except
that pause/resume won't restore the correct extruder coordinates
Added support for M557 grid definition and G29 grid probing (not
complete yet)
Workaround for DWC sending volume ID in new name when renaming a file
across directories
G1 moves with S2 modifier no longer ad the tool offset
Support concurrenrt execution of commands form different channels
M143 now supports individual temperature limits per heater
Fixed issue with dely of up to 2 seconds when switching Duet WiFi heater
channel 3 to servo mode
When enable polarity is set using the M569 R parameter, disable the
corresponding drive
Add exdperimental S99 option on G1 command to log probe changes (Duet
WiFi only)
