RRP logo updated.

Configuration.h

@@ -24,8 +24,8 @@ Licence: GPL
 #define CONFIGURATION_H
 
 #define NAME "RepRapFirmware"
-#define VERSION "0.26"
-#define DATE "2013-11-29"
+#define VERSION "0.27"
+#define DATE "2013-11-30"
 #define LAST_AUTHOR "reprappro.com"
 
 // Other firmware that we might switch to be compatible with.

Platform.cpp

@@ -332,7 +332,6 @@ void Platform::SetHeater(int8_t heater, const float& power)
   if(heatOnPins[heater] < 0)
     return;
   
-  
   byte p = (byte)(255.0*fmin(1.0, fmax(0.0, power)));
   if(HEAT_ON == 0)
 	  p = 255 - p;

Platform.h

@@ -125,7 +125,7 @@ Licence: GPL
 #define STANDBY_TEMPERATURES {ABS_ZERO, ABS_ZERO} // We specify one for the bed, though it's not needed
 #define ACTIVE_TEMPERATURES {ABS_ZERO, ABS_ZERO}
 #define COOLING_FAN_PIN 34
-#define HEAT_ON 0 // 0 for inverted heater (eg Duet v0.6)
+#define HEAT_ON 0 // 0 for inverted heater (eg Duet v0.6) 1 for not (e.g. Duet v0.4)
 
 #define AD_RANGE 1023.0//16383 // The A->D converter that measures temperatures gives an int this big as its max value
 
@@ -595,6 +595,8 @@ class Platform
   byte gateWay[4];
 };
 
+// Seconds
+
 inline float Platform::Time()
 {
   unsigned long now = micros();

SD-image/sys/config.g

@@ -4,11 +4,13 @@ M111 S1; Debug on
 M550 POrmerod; Set the machine's name
 M551 Preprap; Set the password
 M552 P192.168.1.14; Set the IP address
-M555 P2
-M92 E420
+M553 P255.255.255.0; Set netmask
+M554 P192.168.1.1; Set the gateway
+M555 P2; Emulate Marlin USB output
+M92 E420; Set extruder steps/mm
 G21 ; Work in mm
 G90 ; Absolute positioning
 M83 ; Extrusions relative
-G31 Z0.0 P500 ; Set Z probe height and threshold
+G31 Z0.5 P500 ; Set Z probe height and threshold
 M906 X800 Y800 Z800 E800 ; Motor currents (mA)
 T0 ; Select extruder 0