36 lines
2.1 KiB
Text
36 lines
2.1 KiB
Text
; Huxley Duo config file for dc42 Duet firmware
|
|
; Based on RepRapPro version 1.04
|
|
M111 S0 ; Debug off
|
|
M550 PMyHuxleyDuo ; Machine name (can be anything you like)
|
|
M551 Preprap ; Machine password (used for FTP access)
|
|
M540 P0xBE:0xEF:0xDE:0xAD:0xFE:0x14 ; MAC Address
|
|
M552 P0.0.0.0 ; IP address (0 = use DHCP)
|
|
M553 P255.255.255.0 ; Netmask
|
|
M554 P192.168.1.1 ; Gateway
|
|
M555 P2 ; Set output to look like Marlin
|
|
G21 ; Work in millimetres
|
|
G90 ; Send absolute coordinates...
|
|
M83 ; ...but relative extruder moves
|
|
M574 X0 Y1 Z0 S1 ; set endstop configuration (Y endstop only, at low end, active high)
|
|
M569 P0 S1 ; Reverse the X motor
|
|
M569 P3 S0 ; Don't reverse the extruder motor
|
|
M92 X87.4890 Y87.4890 Z4000 ; Set axis steps/mm
|
|
M906 X600 Y600 Z600 E600 ; Set motor currents (mA)
|
|
M305 P0 T100000 R4700 ; bed thermistor is 100K with 4K7 series resistor
|
|
M305 P1 R4700 ; first nozzle thermistor has 4K7 series resistor
|
|
M305 P2 R4700 ; second nozzle thermistor has 4K7 series resistor
|
|
M92 E660 ; Set extruder steps per mm
|
|
M558 P2 ; Use a modulated Z probe (change to P1 if you have a dc42 diff IR zprobe)
|
|
G31 Z0.6 P550 ; Set the probe height and threshold (deliberately too high to avoid bed crashes on initial setup)
|
|
M556 S78 X0 Y0 Z0 ; Put your axis compensation here
|
|
M201 X3000 Y3000 Z150 E500 ; Accelerations (mm/s^2)
|
|
M203 X15000 Y15000 Z100 E3600 ; Maximum speeds (mm/min)
|
|
M566 X200 Y200 Z30 E20 ; Maximum jerk rates mm/minute
|
|
M563 P0 D0 H1 ; Define tool 0
|
|
G10 P0 S-273 R-273 ; Set tool 0 operating and standby temperatures
|
|
;M563 P1 D1 H2 ; Define tool 1 Uncomment if you have a dual colour upgrade
|
|
;G10 P1 X19 S-273 R-273 ; Set tool 1 operating and standby temperatures Uncomment if you have a dual colour upgrade
|
|
M208 X130 Y138 Z95 ; set axis maxima (adjust to suit your machine)
|
|
M208 X-13 Y-4 Z-0.5 S1 ; set axis minim (adjust to make X=0 and Y=0 the edge of the bed after homing)
|
|
;
|
|
T0 ; select first hot end
|