811de41a7d
New features: - M291 command is provided to display a message box with options for timeout, acknowledgement and Z jog buttons - M292 command is provided to acknowledge M291 messages - Manual delta calibration and bed compensation is supported (use P0 in the M558 command to indicate that there is no Z probe) - Minimum value for S parameter (maximum heater PWM) in M307 command is reduced from 20% to 1% - Core XYU kinematics are now supported (thanks Lars) - RADDS build now supports 9 motors (thanks Tom) - If a homing move uses parameter S3 instead of S1 then the axis minimum or maximum value is set to the current position instead of vice versa - M589 with no parameters now reports the Duet's own SSID - M589 S"*" now deletes the Duet WiFi's own access point details Bug fixes: - Tool X offsets are now applied on the next move even if it has no Z parameter - The tool change restore point coordinates now take account of X axis mapping - M588 P"*" command (forget all access points) now works - On the Duet WiFi, after using M589 to set up access point parameters, when M552 S2 was sent to start the WiFi module in AP mode it reported "WiFi reported error: invalid access point configuration". The fix also needs DuetWiFiServer version 1.19beta7. - On a delta printer the effector height is limited to reachable values Areas of code refactored (so watch out for new bugs): - G30 bed probing - Baby stepping - Tool offset implementation Upgrade notes: - SSIDs and passwords in M587, M588 and M589 commands must now be enclosed in double quotes - Height map filenames in G29, M374 and M375 commands must now be enclosed in double quotes - On a Duet WiFi you should also upgrade DuetWiFiServer.bin to version 1.19beta7. You do not need to perform a simultaneous upgrade, but M587 and M589 reporting functionality won't work correctly if your DuetWiFiFirmware and DuetWiFiServer versions are out of step. |
||
|---|---|---|
| .. | ||
| Duet-0.6-0.8.5 | ||
| Duet-Ethernet | ||
| Duet-WiFi | ||
| RADDS/Edge | ||