8464b5bfac
1. Reworked network layer to be more robust in the presence of network errors (hopefully). In particular, don't release transmit buffers if they might still be needed to retry sending data because the ACK got lost. 2. Fixed bug whereby fileinfo command looked for the print height and filament used if the extensio was .gcode or .gc or .gco but not if it was .g. 3. When the M25 (pause print) command is received, pause the current gcode so that commands such as M116 (wait for temperatures) can be interrupted.
85 lines
2.1 KiB
C
85 lines
2.1 KiB
C
/****************************************************************************************************
|
|
|
|
RepRapFirmware - Configuration
|
|
|
|
This is where all machine-independent configuration and other definitions are set up. Nothing that
|
|
depends on any particular RepRap, RepRap component, or RepRap controller should go in here. Define
|
|
machine-dependent things in Platform.h
|
|
|
|
-----------------------------------------------------------------------------------------------------
|
|
|
|
Version 0.1
|
|
|
|
18 November 2012
|
|
|
|
Adrian Bowyer
|
|
RepRap Professional Ltd
|
|
http://reprappro.com
|
|
|
|
Licence: GPL
|
|
|
|
****************************************************************************************************/
|
|
|
|
#ifndef CONFIGURATION_H
|
|
#define CONFIGURATION_H
|
|
|
|
#define NAME "RepRapFirmware"
|
|
#define VERSION "0.59d-dc42"
|
|
#define DATE "2014-05-28"
|
|
#define LAST_AUTHOR "dc42"
|
|
|
|
// Other firmware that we might switch to be compatible with.
|
|
|
|
enum Compatibility
|
|
{
|
|
me = 0,
|
|
reprapFirmware = 1,
|
|
marlin = 2,
|
|
teacup = 3,
|
|
sprinter = 4,
|
|
repetier = 5
|
|
};
|
|
|
|
// Some numbers...
|
|
|
|
#define ABS_ZERO (-273.15) // Celsius
|
|
|
|
#define INCH_TO_MM (25.4)
|
|
|
|
#define HEAT_SAMPLE_TIME (0.5) // Seconds
|
|
|
|
#define TEMPERATURE_CLOSE_ENOUGH (2.5) // Celsius
|
|
#define TEMPERATURE_LOW_SO_DONT_CARE (40.0) // Celsius
|
|
|
|
// If temperatures fall outside this range, something nasty has happened.
|
|
|
|
#define BAD_LOW_TEMPERATURE -30.0
|
|
#define BAD_HIGH_TEMPERATURE 300.0
|
|
#define MAX_BAD_TEMPERATURE_COUNT 6
|
|
|
|
#define STANDBY_INTERRUPT_RATE 2.0e-4 // Seconds
|
|
|
|
#define NUMBER_OF_PROBE_POINTS 4
|
|
#define Z_DIVE 5.0 // Height from which to probe the bed (mm)
|
|
|
|
#define SILLY_Z_VALUE -9999.0
|
|
|
|
// Webserver stuff
|
|
|
|
#define DEFAULT_PASSWORD "reprap"
|
|
#define DEFAULT_NAME "My RepRap 1"
|
|
#define INDEX_PAGE "reprap.htm"
|
|
//#define MESSAGE_FILE "messages.txt" // currently unused
|
|
#define FOUR04_FILE "html404.htm"
|
|
#define CONFIG_FILE "config.g" // The file that sets the machine's parameters
|
|
#define HOME_X_G "homex.g"
|
|
#define HOME_Y_G "homey.g"
|
|
#define HOME_Z_G "homez.g"
|
|
#define HOME_ALL_G "homeall.g"
|
|
|
|
#define LONG_TIME 300.0 // Seconds
|
|
|
|
#define EOF_STRING "<!-- **EoF** -->"
|
|
|
|
|
|
#endif
|