4a1072a8e7
Merged in chrishamm's changes including OutputBuffer fix, changes to Roland pin numbers, rr_configfile support in web server, and Roland and inkjet pin numbers moved to Pins_duet.h Merged in wrangellboy's http response changes for compatibility with Edge browser Other minor changes
128 lines
5.6 KiB
C
128 lines
5.6 KiB
C
#ifndef PINS_DUET_H__
|
|
#define PINS_DUET_H__
|
|
|
|
// What are we supposed to be running on
|
|
#define ELECTRONICS "Duet (+ Extension)"
|
|
|
|
// Default board type
|
|
#define DEFAULT_BOARD_TYPE BoardType::Duet_06
|
|
|
|
// The physical capabilities of the machine
|
|
|
|
const size_t DRIVES = 9; // The number of drives in the machine, including X, Y, and Z plus extruder drives
|
|
#define DRIVES_(a,b,c,d,e,f,g,h,i) { a,b,c,d,e,f,g,h,i }
|
|
|
|
const int8_t HEATERS = 7; // The number of heaters in the machine; 0 is the heated bed even if there isn't one
|
|
#define HEATERS_(a,b,c,d,e,f,g) { a,b,c,d,e,f,g }
|
|
|
|
const size_t AXES = 3; // The number of movement axes in the machine, usually just X, Y and Z. <= DRIVES
|
|
const size_t NUM_SERIAL_CHANNELS = 3; // The number of serial IO channels (USB and two auxiliary UARTs)
|
|
#define SERIAL_MAIN_DEVICE SerialUSB
|
|
#define SERIAL_AUX_DEVICE Serial
|
|
#define SERIAL_AUX2_DEVICE Serial1
|
|
|
|
// The numbers of entries in each array must correspond with the values of DRIVES, AXES, or HEATERS. Set values to -1 to flag unavailability.
|
|
|
|
// DRIVES
|
|
|
|
const Pin ENABLE_PINS[DRIVES] = { 29, 27, X1, X0, 37, X8, 50, 47, X13 };
|
|
const bool ENABLE_VALUES[DRIVES] = { false, false, false, false, false, false, false, false, false }; // What to send to enable a drive
|
|
const Pin STEP_PINS[DRIVES] = { 14, 25, 5, X2, 41, 39, X4, 49, X10 };
|
|
const Pin DIRECTION_PINS[DRIVES] = { 15, 26, 4, X3, 35, 53, 51, 48, X11 };
|
|
const bool DIRECTIONS[DRIVES] = { BACKWARDS, FORWARDS, FORWARDS, FORWARDS, FORWARDS, FORWARDS, FORWARDS, FORWARDS, FORWARDS }; // What each axis needs to make it go forwards - defaults
|
|
|
|
// Endstops
|
|
// RepRapFirmware only has a single endstop per axis. gcode defines if it is a max ("high end") or min ("low end") endstop. gcode also sets if it is active HIGH or LOW.
|
|
const Pin END_STOP_PINS[DRIVES] = { 11, 28, 60, 31, 24, 46, 45, 44, X9 };
|
|
|
|
// Indices for motor current digipots (if any): first 4 are for digipot 1 (on duet), second 4 for digipot 2 (on expansion board)
|
|
const uint8_t POT_WIPES[8] = { 1, 3, 2, 0, 1, 3, 2, 0 };
|
|
const float SENSE_RESISTOR = 0.1; // Stepper motor current sense resistor
|
|
const float MAX_STEPPER_DIGIPOT_VOLTAGE = (3.3 * 2.5 / (2.7 + 2.5)); // Stepper motor current reference voltage
|
|
const float MAX_STEPPER_DAC_VOLTAGE = 2.12; // Stepper motor current reference voltage for E1 if using a DAC
|
|
const int DAC0_DIGITAL_PIN = 66; // Arduino Due pin number corresponding to DAC0 output pin
|
|
|
|
// HEATERS
|
|
|
|
const bool HEAT_ON = false; // false for inverted heater (e.g. Duet v0.6), true for not (e.g. Duet v0.4)
|
|
|
|
const Pin TEMP_SENSE_PINS[HEATERS] = { 5, 4, 0, 7, 8, 9, 11 }; // Analogue pin numbers
|
|
const Pin HEAT_ON_PINS[HEATERS] = { 6, X5, X7, 7, 8, 9, -1 }; // Heater Channel 7 (pin X17) is shared with Fan1. Only define 1 or the other
|
|
|
|
// Default thermistor parameters
|
|
// Bed thermistor: http://uk.farnell.com/epcos/b57863s103f040/sensor-miniature-ntc-10k/dp/1299930?Ntt=129-9930
|
|
// Hot end thermistor: http://www.digikey.co.uk/product-search/en?x=20&y=11&KeyWords=480-3137-ND
|
|
const float BED_R25 = 10000.0;
|
|
const float BED_BETA = 3988.0;
|
|
const float EXT_R25 = 100000.0;
|
|
const float EXT_BETA = 4138.0;
|
|
|
|
// Thermistor series resistor value in Ohms
|
|
const float THERMISTOR_SERIES_RS = 1000.0;
|
|
|
|
// Number of MAX31855 chips to support
|
|
const size_t MAX31855_START_CHANNEL = 100;
|
|
const size_t MAX31855_DEVICES = 4;
|
|
|
|
// Digital pins the 31855s have their select lines tied to
|
|
const Pin MAX31855_CS_PINS[MAX31855_DEVICES] = { 16, 17, 18, 19 };
|
|
|
|
// Arduino Due pin number that controls the ATX power on/off
|
|
const Pin ATX_POWER_PIN = 12; // Arduino Due pin number that controls the ATX power on/off
|
|
|
|
// Analogue pin numbers
|
|
const Pin Z_PROBE_PIN = 10; // Analogue pin number
|
|
|
|
// Digital pin number to turn the IR LED on (high) or off (low)
|
|
const Pin Z_PROBE_MOD_PIN = 52; // Digital pin number to turn the IR LED on (high) or off (low) on Duet v0.6 and v1.0 (PB21)
|
|
const Pin Z_PROBE_MOD_PIN07 = X12; // Digital pin number to turn the IR LED on (high) or off (low) on Duet v0.7 and v0.8.5 (PC10)
|
|
|
|
// COOLING FANS
|
|
|
|
const size_t NUM_FANS = 2;
|
|
const Pin COOLING_FAN_PINS[NUM_FANS] = { X6, X17 }; // Pin D34 is PWM capable but not an Arduino PWM pin - use X6 instead
|
|
const Pin COOLING_FAN_RPM_PIN = 23; // Pin PA15
|
|
|
|
// INKJET CONTROL PINS
|
|
|
|
const Pin INKJET_SERIAL_OUT = 65; // Serial bitpattern into the shift register
|
|
const Pin INKJET_SHIFT_CLOCK = 20; // Shift the register
|
|
const Pin INKJET_STORAGE_CLOCK = 67; // Put the pattern in the output register
|
|
const Pin INKJET_OUTPUT_ENABLE = 66; // Make the output visible
|
|
const Pin INKJET_CLEAR = 36; // Clear the register to 0
|
|
|
|
// Roland mill
|
|
const int8_t ROLAND_RTS_PIN = 77; // Expansion pin 27, SPI0_NPCS0
|
|
const int8_t ROLAND_CTS_PIN = 87; // Expansion pin 26, SPI0_NPCS1
|
|
|
|
// Definition of which pins we allow to be controlled using M42
|
|
//
|
|
// The allowed pins are these ones on the DueX4 expansion connector:
|
|
//
|
|
// TXD1 aka PA13 aka pin 16
|
|
// RXD1 aka PA12 aka pin 17
|
|
// TXD0 aka PA11 aka pin 18
|
|
// RXD0 aka PA10 aka pin 19
|
|
// PC4_PWML1 aka PC4 aka pin 36
|
|
// AD13 aka PB20 aka pin 66
|
|
// AD14 aka PB21 aka pin 52
|
|
// PB16 aka pin 67 (could possibly allow analog output on this one)
|
|
// RTS1 aka PA14 aka pin 23
|
|
// TWD1 aka PB12 aka pin 20
|
|
// TWCK1 aka PB13 aka pin 21
|
|
|
|
const size_t NUM_PINS_ALLOWED = 72;
|
|
|
|
#define PINS_ALLOWED { \
|
|
/* pins 00-07 */ 0, \
|
|
/* pins 08-15 */ 0, \
|
|
/* pins 16-23 */ 0b10111111, \
|
|
/* pins 24-31 */ 0, \
|
|
/* pins 32-39 */ 0b00010000, \
|
|
/* pins 40-47 */ 0, \
|
|
/* pins 48-55 */ 0b00010000, \
|
|
/* pins 56-63 */ 0, \
|
|
/* pins 64-71 */ 0b00001100 \
|
|
}
|
|
|
|
#endif
|