e227dab386
Increase incoming web gcode buffer size to 1200 chars to allow more gcodes to be sent in each message Include free buffer size in poll response Include response sequence number in poll response Implement M30 (delete file) via USB interface Support M503 and M111 commands via web interface
88 lines
2.1 KiB
C
88 lines
2.1 KiB
C
/****************************************************************************************************
|
|
|
|
RepRapFirmware - Configuration
|
|
|
|
This is where all machine-independent configuration and other definitions are set up. Nothing that
|
|
depends on any particular RepRap, RepRap component, or RepRap controller should go in here. Define
|
|
machine-dependent things in Platform.h
|
|
|
|
-----------------------------------------------------------------------------------------------------
|
|
|
|
Version 0.1
|
|
|
|
18 November 2012
|
|
|
|
Adrian Bowyer
|
|
RepRap Professional Ltd
|
|
http://reprappro.com
|
|
|
|
Licence: GPL
|
|
|
|
****************************************************************************************************/
|
|
|
|
#ifndef CONFIGURATION_H
|
|
#define CONFIGURATION_H
|
|
|
|
#define NAME "RepRapFirmware"
|
|
#define VERSION "0.57b-dc42"
|
|
#define DATE "2014-01-27"
|
|
#define LAST_AUTHOR "reprappro.com"
|
|
|
|
// Other firmware that we might switch to be compatible with.
|
|
|
|
enum Compatibility
|
|
{
|
|
me = 0,
|
|
reprapFirmware = 1,
|
|
marlin = 2,
|
|
teacup = 3,
|
|
sprinter = 4,
|
|
repetier = 5
|
|
};
|
|
|
|
// Some numbers...
|
|
|
|
#define ABS_ZERO -273.15 // Celsius
|
|
|
|
#define INCH_TO_MM 25.4
|
|
|
|
#define HEAT_SAMPLE_TIME 0.5 // Seconds
|
|
|
|
#define TEMPERATURE_CLOSE_ENOUGH 5.0 // Celsius
|
|
#define TEMPERATURE_LOW_SO_DONT_CARE 40.0 // Celsius
|
|
|
|
// If temperatures fall outside this range, something
|
|
// nasty has happened.
|
|
|
|
#define BAD_LOW_TEMPERATURE -30.0
|
|
#define BAD_HIGH_TEMPERATURE 300.0
|
|
#define MAX_BAD_TEMPERATURE_COUNT 6
|
|
|
|
#define STANDBY_INTERRUPT_RATE 2.0e-4 // Seconds
|
|
|
|
#define NUMBER_OF_PROBE_POINTS 4
|
|
#define Z_DIVE 5.0 // Height from which to probe the bed (mm)
|
|
|
|
#define SILLY_Z_VALUE -9999.0
|
|
|
|
// Webserver stuff
|
|
|
|
//#define NETWORK true // Set true to turn the ethernet on
|
|
|
|
#define DEFAULT_PASSWORD "reprap"
|
|
#define DEFAULT_NAME "My RepRap 1"
|
|
#define INDEX_PAGE "reprap.htm"
|
|
#define MESSAGE_FILE "messages.txt"
|
|
#define FOUR04_FILE "html404.htm"
|
|
#define CONFIG_FILE "config.g" // The file that sets the machine's parameters
|
|
#define HOME_X_G "homex.g"
|
|
#define HOME_Y_G "homey.g"
|
|
#define HOME_Z_G "homez.g"
|
|
#define HOME_ALL_G "homeall.g"
|
|
|
|
#define LONG_TIME 300.0 // Seconds
|
|
|
|
#define EOF_STRING "<!-- **EoF** -->"
|
|
|
|
|
|
#endif
|