08f7d2e9b1
Changed webserver to support HTTP requests that span multiple TCP messages. Changed upload code to to block file writes direct fro the received message. Increased maximum upload message size. Changed fileinfo command to report layer height and what program generated the gcode file, if available.
85 lines
2.1 KiB
C
85 lines
2.1 KiB
C
/****************************************************************************************************
|
|
|
|
RepRapFirmware - Configuration
|
|
|
|
This is where all machine-independent configuration and other definitions are set up. Nothing that
|
|
depends on any particular RepRap, RepRap component, or RepRap controller should go in here. Define
|
|
machine-dependent things in Platform.h
|
|
|
|
-----------------------------------------------------------------------------------------------------
|
|
|
|
Version 0.1
|
|
|
|
18 November 2012
|
|
|
|
Adrian Bowyer
|
|
RepRap Professional Ltd
|
|
http://reprappro.com
|
|
|
|
Licence: GPL
|
|
|
|
****************************************************************************************************/
|
|
|
|
#ifndef CONFIGURATION_H
|
|
#define CONFIGURATION_H
|
|
|
|
#define NAME "RepRapFirmware"
|
|
#define VERSION "0.59e-dc42"
|
|
#define DATE "2014-06-01"
|
|
#define LAST_AUTHOR "dc42"
|
|
|
|
// Other firmware that we might switch to be compatible with.
|
|
|
|
enum Compatibility
|
|
{
|
|
me = 0,
|
|
reprapFirmware = 1,
|
|
marlin = 2,
|
|
teacup = 3,
|
|
sprinter = 4,
|
|
repetier = 5
|
|
};
|
|
|
|
// Some numbers...
|
|
|
|
#define ABS_ZERO (-273.15) // Celsius
|
|
|
|
#define INCH_TO_MM (25.4)
|
|
|
|
#define HEAT_SAMPLE_TIME (0.5) // Seconds
|
|
|
|
#define TEMPERATURE_CLOSE_ENOUGH (2.5) // Celsius
|
|
#define TEMPERATURE_LOW_SO_DONT_CARE (40.0) // Celsius
|
|
|
|
// If temperatures fall outside this range, something nasty has happened.
|
|
|
|
#define BAD_LOW_TEMPERATURE -30.0
|
|
#define BAD_HIGH_TEMPERATURE 300.0
|
|
#define MAX_BAD_TEMPERATURE_COUNT 6
|
|
|
|
#define STANDBY_INTERRUPT_RATE 2.0e-4 // Seconds
|
|
|
|
#define NUMBER_OF_PROBE_POINTS 4
|
|
#define Z_DIVE 5.0 // Height from which to probe the bed (mm)
|
|
|
|
#define SILLY_Z_VALUE -9999.0
|
|
|
|
// Webserver stuff
|
|
|
|
#define DEFAULT_PASSWORD "reprap"
|
|
#define DEFAULT_NAME "My RepRap 1"
|
|
#define INDEX_PAGE "reprap.htm"
|
|
//#define MESSAGE_FILE "messages.txt" // currently unused
|
|
#define FOUR04_FILE "html404.htm"
|
|
#define CONFIG_FILE "config.g" // The file that sets the machine's parameters
|
|
#define HOME_X_G "homex.g"
|
|
#define HOME_Y_G "homey.g"
|
|
#define HOME_Z_G "homez.g"
|
|
#define HOME_ALL_G "homeall.g"
|
|
|
|
#define LONG_TIME 300.0 // Seconds
|
|
|
|
#define EOF_STRING "<!-- **EoF** -->"
|
|
|
|
|
|
#endif
|