/****************************************************************************************************

RepRapFirmware - Platform: RepRapPro Mendel with Prototype Arduino Due controller

Platform contains all the code and definitons to deal with machine-dependent things such as control 
pins, bed area, number of extruders, tolerable accelerations and speeds and so on.

-----------------------------------------------------------------------------------------------------

Version 0.1

18 November 2012

Adrian Bowyer
RepRap Professional Ltd
http://reprappro.com

Licence: GPL

****************************************************************************************************/

#include "RepRapFirmware.h"

// Arduino initialise and loop functions
// Put nothing in these other than calls to the RepRap equivalents

void setup()
{
  reprap.init();  
}
  
void loop()
{
  reprap.spin();
}

//*************************************************************************************************

Platform::Platform(RepRap* r)
{
  reprap = r;
  init();
}

void Platform::init()
{ 
  uint8_t i;
  
  Serial.begin(9600);
  Serial.println("Platform constructor");
  
  if(!loadFromStore())
  {     
  // DRIVES
  
    stepPins = STEP_PINS;
    directionPins = DIRECTION_PINS;
    enablePins = ENABLE_PINS;
    disableDrives = DISABLE_DRIVES;
    maxFeedrates = MAX_FEEDRATES;
    maxAccelerations = MAX_ACCELERATIONS;
    driveStepsPerUnit = DRIVE_STEPS_PER_UNIT;
    jerks = JERKS;
    driveRelativeModes = DRIVE_RELATIVE_MODES;
    
  // AXES
  
    lowStopPins = LOW_STOP_PINS;
    highStopPins = HIGH_STOP_PINS;
    axisLengths = AXIS_LENGTHS;
    fastHomeFeedrates = FAST_HOME_FEEDRATES;
   
  // HEATERS - Bed is assumed to be the first
  
    tempSensePins = TEMP_SENSE_PINS;
    heatOnPins = HEAT_ON_PINS;
    thermistorBetas = THERMISTOR_BETAS;
    thermistorSeriesRs = THERMISTOR_SERIES_RS;
    thermistor25Rs = THERMISTOR_25_RS;
    usePid = USE_PID;
    pidKis = PID_KIS;
    pidKds = PID_KDS;
    pidKps = PID_KPS;
    pidILimits = PID_I_LIMITS;
  }
  
  for(i = 0; i < DRIVES; i++)
  {
    if(stepPins[i] >= 0)
      pinMode(stepPins[i], OUTPUT);
    if(directionPins[i] >= 0)  
      pinMode(directionPins[i], OUTPUT);
    if(enablePins[i] >= 0)
    {  
      pinMode(enablePins[i], OUTPUT);
      digitalWrite(enablePins[i], ENABLE);
    }
  }
  
  for(i = 0; i < AXES; i++)
  {
    if(lowStopPins[i] >= 0)
    {
      pinMode(lowStopPins[i], INPUT);
      digitalWrite(lowStopPins[i], HIGH); // Turn on pullup
    }
    if(highStopPins[i] >= 0)
    {
      pinMode(highStopPins[i], INPUT);
      digitalWrite(highStopPins[i], HIGH); // Turn on pullup
    }
  }  
  
  
  for(i = 0; i < HEATERS; i++)
  {
    if(tempSensePins[i] >= 0)
      pinMode(tempSensePins[i], INPUT);
    if(heatOnPins[i] >= 0)
      pinMode(heatOnPins[i], OUTPUT);
  }    

}

// Load settings from local storage; return true if successful, false otherwise

bool Platform::loadFromStore()
{
  return false;
}




//===========================================================================
//=============================Thermal Settings  ============================
//===========================================================================

// See http://en.wikipedia.org/wiki/Thermistor#B_or_.CE.B2_parameter_equation

// BETA is the B value
// RS is the value of the series resistor in ohms
// R_INF is R0.exp(-BETA/T0), where R0 is the thermistor resistance at T0 (T0 is in kelvin)
// Normally T0 is 298.15K (25 C).  If you write that expression in brackets in the #define the compiler 
// should compute it for you (i.e. it won't need to be calculated at run time).

// If the A->D converter has a range of 0..1023 and the measured voltage is V (between 0 and 1023)
// then the thermistor resistance, R = V.RS/(1023 - V)
// and the temperature, T = BETA/ln(R/R_INF)
// To get degrees celsius (instead of kelvin) add -273.15 to T
//#define THERMISTOR_R_INFS ( THERMISTOR_25_RS*exp(-THERMISTOR_BETAS/298.15) ) // Compute in Platform constructor