Jean-Marc Giacalone
ecb93ffcf6
Merged version065 from duet branch.
2014-04-24 21:44:16 +01:00
Adrian Bowyer
a91f650dd9
Now that a number of people are working on this code, I have been going
...
through making the comments more copious, especially in the .h files.
W.I.P.
2014-02-21 16:39:02 +00:00
Adrian Bowyer
3c02c4c104
Updated reprap.htm
2014-02-18 11:25:47 +00:00
Adrian Bowyer
c5d6085772
Added in iamburney's web interface (many thanks to him).
2014-02-11 12:14:59 +00:00
Adrian Bowyer
96818433c6
Making master branch the same as the duet branch.
2013-12-14 12:03:25 +00:00
Adrian Bowyer
dd978290b5
Emergency stop added to the web interface (and Home All taken away, as you almost never want to home Z with the other two.) SD files tidied.
2013-12-04 15:36:26 +00:00
Adrian Bowyer
4c74c4eb30
Upload of reprap.htm implemented (M560). The file must end "<!-- **EoF** -->" without the quotes.
2013-11-20 22:13:23 +00:00
Adrian Bowyer
926aabe078
Added z-probe type selection. See M558.
2013-11-19 15:00:23 +00:00
Adrian Bowyer
713a9fb6b1
Line-by-line web file upload added, but causes troub by blitzing http requests; so commented out. Unused pages for first release removed.
2013-11-19 12:14:12 +00:00
Adrian Bowyer
8b3931c8cf
Memory diagnostics added. Mem usage is printed whenever you turn debugging on (even if it is already on).
2013-11-13 18:16:43 +00:00
Adrian Bowyer
e8eafeda22
Hooks added for (I hope) the final and complete set of all parameter-changing
...
M Codes that we will need. Network initialisation delayed until after the
config.g file is run, to allow machine name etc to be set from that.
2013-11-10 19:39:13 +00:00
Adrian Bowyer
fa9b0d1478
Fixed small bug that prevented absolute extrude moves working right.
2013-11-06 11:10:26 +00:00
Adrian Bowyer
8a8b6eb389
knockout help button now opens new tab on the RepRapPro Firmware documentation page.
2013-10-30 15:32:11 +00:00
Adrian Bowyer
0c7e13a73e
Current position boxes added to web interface, and polled along with temperatures.
2013-10-30 15:04:38 +00:00
Adrian Bowyer
4f703d86ec
Various minor G/M codes implemented like M0. Z start speed and acceleration reduced; they were a bit fierce before.
2013-10-29 22:27:49 +00:00
Adrian Bowyer
5707cc1eea
Fixed the file listing bug. Either in the RepRap code, or somewhere in the SD file code, the #define for _USE_LFN is defined as fals for RepRap, true in the library file ff.c. The result is that ff.c tried to write long
...
file names into a structure created in RepRap that was too short for them. Result - buffer overflow misery. For the moment I've commented out the bit of code in ff.c that handles long names (look for the string ******), but this needs to be tracked down and dealt with properly.
2013-10-29 15:42:40 +00:00
Adrian Bowyer
708822a54e
A couple of tidyings and additions:
...
1. Z home now moves home, rather than just setting the coordinate.
2. Wait for temps implemented.
Also the JSON requests for the g code filelist has been temporarily commented
out in reprap.htm. It was causing the firmware to hang sometimes. To be investigated.
Machine now prints nicely...
2013-10-22 18:27:12 +01:00
Adrian Bowyer
7966335a28
Small knockout bug in reprap.htm fixed - loading the file list didn't work
...
properly. Now seems OK.
2013-10-14 18:29:47 +01:00
Adrian Bowyer
368523e3e9
Web interface works! Horray! Key was to prevent lwip requesting pages when
...
RepRap was still serving the one before.
2013-10-07 17:16:21 +01:00
Adrian Bowyer
0bd51c6582
Still not working. But not working differently...
2013-10-06 22:33:32 +01:00
Adrian Bowyer
07d323a41d
Setting up latest Due code to work on the Duet.
2013-08-28 16:36:38 +01:00
Jean-Marc Giacalone
982846e7e0
project into Eclipse.
2013-08-05 12:19:54 +01:00
