Adrian Bowyer
a26a9f705a
This time with the right date a version number...
2013-11-26 15:22:16 +00:00
Adrian Bowyer
7b9894e543
M206 implemented. This commit has the ethernet enabled and heaters set on by 1 (i.e. Duet v0.5 or below).
2013-11-26 15:12:24 +00:00
Adrian Bowyer
c0b7b4bace
Working on the ether/USB problem. The network can now be disabled (#define NETWORK in Configuration.h). With it disabled the USB works with or without a network cable plugged in. With it enabled the USB only works with a network cable plugged in too. You have to wait for the ether to reinitialise (ether socket lights go out for a couple of secs, then come on, then the green one starts flashing) before trying to talk via the USB. The ether is initialised before config.g is run, so the IP is the one defined in platform.h. The network is disabled in this commit. The heaters are set on by 0, not 1 (i.e. Duet board v0.6 or later). To change this see #define HEAT_ON in platform.h
2013-11-26 13:38:23 +00:00
Adrian Bowyer
00a0ffd9b4
Homing against max endstop for Y (and X) implemented when there is a top
...
endstop but not a bottom one.
2013-11-25 11:03:36 +00:00
Adrian Bowyer
d89b8bace0
X axis endstop now done with Z Probe (if it's activated).
2013-11-25 09:32:13 +00:00
Adrian Bowyer
4c74c4eb30
Upload of reprap.htm implemented (M560). The file must end "<!-- **EoF** -->" without the quotes.
2013-11-20 22:13:23 +00:00
Adrian Bowyer
68e0f833df
Marlin emulation implemented. Pretty much working, but not extensively tested.
2013-11-14 23:32:50 +00:00
Adrian Bowyer
bd51a7c3f0
Fixed Timer overflow bug.
2013-11-13 23:23:31 +00:00
Adrian Bowyer
971fed0d02
Temperature range checking added (see Configuration.h). If temps repeatedly
...
fall outside the set range, it assumes the thermistor is bust and turns off the heater.
2013-11-10 21:55:44 +00:00
Adrian Bowyer
708822a54e
A couple of tidyings and additions:
...
1. Z home now moves home, rather than just setting the coordinate.
2. Wait for temps implemented.
Also the JSON requests for the g code filelist has been temporarily commented
out in reprap.htm. It was causing the firmware to hang sometimes. To be investigated.
Machine now prints nicely...
2013-10-22 18:27:12 +01:00
Jean-Marc Giacalone
8d92b70d0f
File list implemented. Also M201 to set axis accelerations via USB.
2013-10-08 16:33:10 +01:00
Adrian Bowyer
ce76147fc3
Ethernet semi-integrated, but running its own webserver. Need to intercept
...
sends and recieves and direct them at the Webserver class.
2013-09-23 23:34:55 +01:00
emaker-11z
60c71e3a07
Configured to use standard separate library.
2013-09-23 16:23:38 +01:00
Jean-Marc Giacalone
43c208ef5b
Libraries moved to own repo. Web interface toggled by #define ETHERNET.
2013-09-21 09:56:03 +01:00
Adrian Bowyer
d525597ebb
Z probing being implemented under G32. Not finished yet, so don't call G32...
2013-09-13 22:33:14 +01:00
Jean-Marc Giacalone
982846e7e0
project into Eclipse.
2013-08-05 12:19:54 +01:00
reprappro
b207f31dc7
Messages webpage added with session log.
2013-03-04 21:56:42 +00:00
reprappro
b433566c8d
More tidying.
2013-03-02 18:13:12 +00:00
reprappro
a10599f32c
Movement table added. Should really be PHP in a file?
2013-02-21 21:47:50 +00:00
reprappro
f309576fc2
Basic structure of webpages working.
2013-02-21 19:13:28 +00:00
reprappro
d44c133348
Firmware Web interface part working (loads one page, but not two...)
2013-02-17 18:31:12 +00:00
Adrian Bowyer
0e3c762f99
First commit - some work remains...
2012-11-20 17:23:07 +00:00
