Tidied up delta auto-calibration code. We now use least squares for 3,
4, 6 or 7-factor calibration.
When doing delta calibration, if a probe offset was used to adjust the
head position when probing, use the actual head coordinates instead the
probed coordinates.
Bug fix: newline was missing at end of SD card file list sent to USB
when in Marlin emulation mode.
Bug fix: Heater average PWM report (M573) sometimes gave inaccurate
values when the S parameter was used.
Added X and Y z-probe offsets to G31 command
Reworked G31 and G32 to do less work in the step ISR and to support Z
probe on delta printers
Z probe modulation pin is now selected using M558 R parameter instead of
probe type
Incorporated zpl's Network module updates and some of his Gcodes updated
Merged RRP's 0.96 Move code into mine
Added M105 S3, M20 S2 and M36 commands for supporting TFT control panel
Added X parameter to M305 command to allow thermistor channels to be
changed
Removed space after "B:" in M105 response to avoid confusing Pronterface
Added modified lwip files that were missed from last checkin
Fixed incorrect JSON format in response to the rr_files command when no
files were found
Enabled hardware debounce filter on cooling fan RPM pin to get a correct
and stable readout
Fixed bug that caused the cooling fan PWM frequency to be 165kHz. It is
now 25kHz.
Fan RPM is now included in the web interface status response (thanks
zpl).
Many more error messages are now reported to the web interface as well
as the USB interface.
Interrupt-driven network timer task to better cope with slow SD card
writes (thanks zpl)
Module SamNonDuePin is now used for all digital and PWM pin I/O.
Refactored printing to strings and web server json response handling in
preparation for adding support for LCD display via serial link
Added a timer to record how long block writes to SD card take
Merged in zpl's changes. The FTP server is not yet reliable, in
particular trying to delete a file via FTP after copying another may
result in the Duet rebooting due to the webserver module getting stuck
in a spin loop. Also the copied file has on one occasion been observed
to be shorter than the original.
Changed webserver to support HTTP requests that span multiple TCP
messages. Changed upload code to to block file writes direct fro the
received message. Increased maximum upload message size. Changed
fileinfo command to report layer height and what program generated the
gcode file, if available.
Incoming network requests can now span multiple TCP messages. Max upload
buffer increased to 2048. Also return layerHeight and generatedBy values
when asking for fileinfo on a gcode file. This is an interim commit that
needs cleaning up before release.
Fixed problem whereby gcode files printed from SD card that used lots of
small fast moves in sequence would print jerkily if a network cable had
not been connected since reset.
Fixed problem whereby object height and filament needed were not
retrieved from the SD card file to be printed if the filename contained
spaces.
Added support for deprecated M190 command, because slic3r appears to
generate it sometimes
Added support for M564 command to allow movement without limits, copied
from RepRapPro dev branch
Fixed bug in file handling that affected SD card pause/resume
operations. Merged changes from zombiepantslol to allow a height to be
set for a Z endstop switch. Reverted to blocking USB I/O but only for
debug and M503 output. Added return codes for file close and seek
operations. Increased the size of the tail of the file that we scan for
G1 Z commands from 32K to nearly 200K.
Changed network startup to avoid long delay if no network cable is
connected
Enable DHCP support if IP address is configured as 0.0.0.0 (not working
yet)
Move thermistor parameters to M305, added parameter to configure series
resistance
Added B and W PID parameters
