Adrian Bowyer
7d3016a7f3
Some webserver progreass. Can get http requests, and can serve a simple page, both from within the RepRap Firmware Webserver class. Bugs remain...
2013-10-01 23:03:07 +01:00
Adrian Bowyer
2609f66c86
Webserver not yet working. Rest should be OK though.
2013-09-29 23:15:00 +01:00
Adrian Bowyer
49e9bc29c3
G92 Implemented. Tested interactively, but not from a G Code file. Should work though.
2013-09-27 18:15:49 +01:00
Adrian Bowyer
4e6f8a1b75
Interception of http GET working.
2013-09-27 17:21:51 +01:00
Adrian Bowyer
aaf75220de
Working on the http code...
2013-09-24 10:40:21 +01:00
Adrian Bowyer
ce76147fc3
Ethernet semi-integrated, but running its own webserver. Need to intercept
...
sends and recieves and direct them at the Webserver class.
2013-09-23 23:34:55 +01:00
emaker-11z
60c71e3a07
Configured to use standard separate library.
2013-09-23 16:23:38 +01:00
Jean-Marc Giacalone
43c208ef5b
Libraries moved to own repo. Web interface toggled by #define ETHERNET.
2013-09-21 09:56:03 +01:00
Adrian Bowyer
f3e81cbe4c
Z probing now working. The probe signal connects to AD7 which (confusingly)
...
is A0 on the Arduino. The signal seems quite noisy. I have put a 10uF
capacitor across its supply. Maybe add an 0.1uF across its signal?
Two values need to be set in Platform.h:
If v is the value from the A->D on A0, then:
z = v*Z_PROBE_GRADIENT + Z_PROBE_CONSTANT (mm)
Z_PROBE_GRADIENT is dependent on the IR proximity device (though they may
be consistent enough all to have the same value) and Z_PROBE_CONSTANT depends
on how high it is mounted relative to the nozzle.
To generate these values, uncomment the bits of code in and around Platform::Spin()
zero the Z axis by eye, run the program, and raise Z by 0.1mm increments. Put
the raw A->D values in the spreadsheet in the Data directory, and it will
give you the values of Z_PROBE_GRADIENT and Z_PROBE_CONSTANT.
2013-09-15 18:10:33 +01:00
Adrian Bowyer
953828081e
Duet fully (I think) working. :-)
2013-09-10 22:42:43 +01:00
Adrian Bowyer
1dc821cbff
Duet all working except for the bed heater. Investigations continue...
2013-09-09 21:25:38 +01:00
Adrian Bowyer
e3fd24ca95
Configuration file (in sys/config.g) implemented.
2013-09-05 16:10:44 +01:00
Adrian Bowyer
c4017b1019
M906 (set motor current) support added.
2013-09-02 22:56:26 +01:00
Adrian Bowyer
c25816668b
First working Duet version with SD card file reading for G Codes.
2013-09-01 22:45:32 +01:00
Adrian Bowyer
0d0672e49b
"Hollowed out" version with no Ether and no SD, ready for Duet versions of those.
...
USB works, and firmware communicates over that.
2013-08-28 17:32:16 +01:00
Adrian Bowyer
4a335a6e86
Working on the Duet version...
2013-08-28 16:51:18 +01:00
Adrian Bowyer
07d323a41d
Setting up latest Due code to work on the Duet.
2013-08-28 16:36:38 +01:00
Adrian Bowyer
45fe2d33b8
AB's working version of the Duet compile...
2013-08-08 15:30:34 +01:00
Jean-Marc Giacalone
b0a0dab82e
SerialUSB comms work, albeit with call to ClientMonitor() disabled.
2013-08-06 22:32:52 +01:00
Jean-Marc Giacalone
cd91a7338a
dev
2013-08-06 21:58:57 +01:00
Jean-Marc Giacalone
e180f84007
housekeeping.
2013-08-06 10:59:36 +01:00
Jean-Marc Giacalone
982846e7e0
project into Eclipse.
2013-08-05 12:19:54 +01:00
Jean-Marc Giacalone
4bd3e98b13
merged due branch. working in Eclipse
2013-07-23 21:24:55 +01:00
reprappro
d44c133348
Firmware Web interface part working (loads one page, but not two...)
2013-02-17 18:31:12 +00:00
reprappro
40630df7da
Getting the webserver working. WIP.....
2013-02-15 22:49:46 +00:00
reprappro
a1812edadc
Added GCode and Webserver classes.
2013-02-13 18:30:10 +00:00
reprappro
8635fde719
Minor tidying.
2013-01-13 20:56:24 +00:00
Adrian Bowyer
f4da09dbfb
Finalising (probably not...) the structure.
2012-12-22 16:47:47 +00:00
reprappro
4f58b8fe58
Started to add code for prototype Due board.
2012-12-20 21:21:03 +00:00
Adrian Bowyer
0e3c762f99
First commit - some work remains...
2012-11-20 17:23:07 +00:00
