David Crocker
f0d7fd5005
Updated SD fles in /sys
2014-07-17 11:01:11 +01:00
David Crocker
57704f033b
Merge RRP's 0.78 version and my 0.65k version
2014-07-06 19:57:21 +01:00
Adrian Bowyer
2b96c2b6f6
Version 0.78
...
Release.
2014-07-03 13:10:36 +01:00
David Crocker
9e1ad597a4
Merge branch 'duet'
...
Conflicts:
.gitignore
Configuration.h
GCodes.cpp
GCodes.h
Heat.cpp
Heat.h
Move.cpp
Move.h
Platform.cpp
Platform.h
RepRapFirmware.cpp
RepRapFirmware.h
Reprap.h
SD-image/sys/config.g
Webserver.cpp
Webserver.h
network/ethernet_sam.c
network/ethernet_sam.h
network/httpd.c
2014-06-28 17:58:03 +01:00
Jean-Marc Giacalone
23c5f47204
Move tool call in config.g to before M92 command.
2014-05-08 15:47:24 +01:00
Jean-Marc Giacalone
5204dfa834
config.g now selects tool head 1 and sets speeds and accelerations.
2014-05-08 11:19:39 +01:00
Adrian Bowyer
4104ff461b
Version 0.65a. This allows the MAC address for the Duet to be set in config.g (q.v.),
...
which allows multiple Duets to be on the same network.
2014-05-07 18:17:44 +01:00
David Crocker
9edaed4ac1
Further improvements to web upload and tidy-up
...
Further improved web file upload speed
Dealt with Eclipse code analysis warnings
Made some more functions and parameters const-correct
2014-01-30 14:26:45 +00:00
Adrian Bowyer
8ee075289d
Updating master branch to include David Crocker's improvements. Plus a little tidying.
2014-01-13 17:07:18 +00:00
Adrian Bowyer
95a54f763f
Macros made so that they can call macros. Beware recursion....
2014-01-05 16:49:42 +00:00
Adrian Bowyer
ed16ce9682
Updating master branch to bring in homing improvements from the duet branch.
2013-12-23 21:42:58 +00:00
Adrian Bowyer
be1a790c47
Added more efficient canned cycle for when all three axes are being homed.
2013-12-23 21:25:40 +00:00
Adrian Bowyer
c12ebed79c
All axis homing now done with canned cycle files.
2013-12-23 18:07:16 +00:00
Adrian Bowyer
10bf338aa4
Homeing after bed transform applied bug fixed in the duet branch. The master branch will be updated after some further testing. The problem was the X endstop. If X is homed, that stop is triggered. Homeing Y then only moves Y, and so only the Y endstop is tested. But when the transform is applied X moves slightly when Y is homed (as it should) and the X endstop stoped the movement prematurely. You will need to update the files on the SD card as well as the firmware to activate the fix.
2013-12-21 16:46:42 +00:00
Adrian Bowyer
4ed66b8b01
Experimental macro/canned-cycle on the SD implemented.
2013-12-19 23:30:23 +00:00
Adrian Bowyer
96818433c6
Making master branch the same as the duet branch.
2013-12-14 12:03:25 +00:00
Adrian Bowyer
d29058cf9d
Bug in Z probing (the Move class had no function to return the number of probe points) fixed.
2013-12-05 13:22:01 +00:00
Adrian Bowyer
8b76430a9b
RRP logo updated.
2013-11-30 15:48:03 +00:00
Adrian Bowyer
f0b7da252b
M561 reset bed transform to identity added.
2013-11-29 10:55:43 +00:00
Jean-Marc Giacalone
b53832f4ce
M92 bug fixed.
2013-11-20 10:41:00 +00:00
Jean-Marc Giacalone
3b0dd0ec58
Upload of configuration file config.g implemented with M559.
2013-11-20 10:25:44 +00:00
Adrian Bowyer
965f41e953
Shifted new M codes to start at M550. Added setting of Netmask and gateway.
2013-11-17 22:10:14 +00:00
Adrian Bowyer
104528ab66
Added user-selection of IP address via M502.
2013-11-17 17:58:30 +00:00
Adrian Bowyer
c7286905b2
Ability to specify bed Z probe points added. See M505.
2013-11-15 22:04:52 +00:00
Adrian Bowyer
8b3931c8cf
Memory diagnostics added. Mem usage is printed whenever you turn debugging on (even if it is already on).
2013-11-13 18:16:43 +00:00
Adrian Bowyer
4f703d86ec
Various minor G/M codes implemented like M0. Z start speed and acceleration reduced; they were a bit fierce before.
2013-10-29 22:27:49 +00:00
Adrian Bowyer
676bbab6a1
Fixed a bug whereby long extrudes simultaneous with short XY moves were constrained by the XY upper velocity and acceleration limits, rather than those for extrusion. Normally you want extrusion to be subservient to XY. But (typically when a retraction is being recovered during an XY move) the extrusion limits should constrain the XY move, not the other way round.
2013-10-27 16:21:21 +00:00
Adrian Bowyer
e1601d7b3f
Various bits of code tidying. Lookahead fixed to take account of bed transform (we can no longer assume that Z moves are strictly orthogonal to XY moves, and so their scalar product may be non-zero). All velocities are now in mm/s internally. The GCodes class is responsible for multiplying mm/min by 0.0166667.
2013-10-24 16:53:25 +01:00
Adrian Bowyer
708822a54e
A couple of tidyings and additions:
...
1. Z home now moves home, rather than just setting the coordinate.
2. Wait for temps implemented.
Also the JSON requests for the g code filelist has been temporarily commented
out in reprap.htm. It was causing the firmware to hang sometimes. To be investigated.
Machine now prints nicely...
2013-10-22 18:27:12 +01:00
Adrian Bowyer
3c901fb194
Further work on Z probing. One problem was working with a white-painted bed. Replacing that with ordinary Kapton-covered glass seems to work better. And that has allowed the debugging of the code. But the probe still does not always see the bed.
2013-10-21 23:09:21 +01:00
Adrian Bowyer
79c008d469
G31 modified to allow reporting of probe values, and setting of a Z value and threshold. (See http://reprap.org/wiki/G-code#G29-G32:_Bed_probing )
2013-10-20 22:48:26 +01:00
Jean-Marc Giacalone
8d92b70d0f
File list implemented. Also M201 to set axis accelerations via USB.
2013-10-08 16:33:10 +01:00
Adrian Bowyer
027ddf3b8e
Code added to add a bed plane z = aX.x + aY.y + aC to all movements.
...
Note that this means that X/Y minimum speeds and accelerations now take
precedence over Z, unless there is only Z movement.
2013-09-13 13:05:25 +01:00
Adrian Bowyer
e3fd24ca95
Configuration file (in sys/config.g) implemented.
2013-09-05 16:10:44 +01:00
reprappro
733dd776ed
Separated printing files from file upload and download. Added sys folder for properties file.
2013-02-24 20:57:14 +00:00
